§25.675. Stops.
14 C.F.R. § 25.675
Each control system must have stops that positively limit the range of motion of each movable aerodynamic surface controlled by the system.
Each stop must be located so that wear, slackness, or take-up adjustments will not adversely affect the control characteristics of the airplane because of a change in the range of surface travel.
Each stop must be able to withstand any loads corresponding to the design conditions for the control system.
Notes, amendments, and revision history
Amendments
[Doc. No. 5066, 29 FR 18291, Dec. 24, 1964, as amended by Amdt. 25-38, 41 FR 55466, Dec. 20, 1976]
Authority
Authority: 49 U.S.C. 106(f), 106(g), 40113, 44701, 44702 and 44704; Pub. L. 115-254, 132 Stat 3281 (49 U.S.C. 44903 note).
Source
Source: Docket No. 5066, 29 FR 18291, Dec. 24, 1964, unless otherwise noted.
Amendments
[Doc. No. 5066, 29 FR 18291, Dec. 24, 1964, as amended by Amdt. 25-38, 41 FR 55466, Dec. 20, 1976]