§217.210. Standardized measurement method for specific risk.
12 C.F.R. § 217.210
(1) The position is denominated in the sovereign entity's currency;
(2) The Board-regulated institution has at least an equivalent amount of liabilities in that currency; and
(3) The sovereign entity allows banks under its jurisdiction to assign the lower specific risk-weighting factor to the same exposures to the sovereign entity.
(1) The PSE's home country allows banks under its jurisdiction to assign a lower specific risk-weighting factor to such position; and
(2) The specific risk-weighting factor is not lower than the risk weight that corresponds to the PSE's home country in accordance with Tables 3 and 4 of this section.
(2) A Board-regulated institution must assign an 8.0 percent specific risk-weighting factor for corporate debt positions that are exposures to entities that do not have publicly traded instruments outstanding.
(2) A Board-regulated institution shall not assign a corporate debt position a specific risk-weighting factor that is lower than the specific risk-weighting factor that corresponds to the CRC of the issuer's home country, if applicable, in table 1 of this section.
(2) A Board-regulated institution that is an advanced approaches Board-regulated institution or is a U.S. intermediate holding company that is required to be established or designated pursuant to 12 CFR 252.153 and that is calculating risk-weighted assets according to Subpart E must calculate a specific risk add-on for a securitization position in accordance with paragraph (b)(2)(vii)(B) of this section if the Board-regulated institution and the securitization position each qualifies to use the SFA in § 217.143. A Board-regulated institution that is an advanced approaches Board-regulated institution or is a U.S. intermediate holding company that is required to be established or designated pursuant to 12 CFR 252.153 and that is calculating risk-weighted assets according to Subpart E with a securitization position that does not qualify for the SFA under paragraph (b)(2)(vii)(B) of this section may assign a specific risk-weighting factor to the securitization position using the SSFA in accordance with paragraph (b)(2)(vii)(C) of this section or assign a specific risk-weighting factor of 100 percent to the position.
(3) A Board-regulated institution must treat a short securitization position as if it is a long securitization position solely for calculation purposes when using the SFA in paragraph (b)(2)(vii)(B) of this section or the SSFA in paragraph (b)(2)(vii)(C) of this section.
(1) For purposes of determining the specific risk add-on using the SFA in paragraph (b)(2)(vii)(B) of this section or the specific risk-weighting factor for an n th-to-default credit derivative using the SSFA in paragraph (b)(2)(vii)(C) of this section the Board-regulated institution must calculate the attachment point and detachment point of its position as follows:
(i) The attachment point (parameter A) is the ratio of the sum of the notional amounts of all underlying exposures that are subordinated to the Board-regulated institution's position to the total notional amount of all underlying exposures. For purposes of the SSFA, parameter A is expressed as a decimal value between zero and one. For purposes of using the SFA in paragraph (b)(2)(vii)(B) of this section to calculate the specific add-on for its position in an n th-to-default credit derivative, parameter A must be set equal to the credit enhancement level (L) input to the SFA formula in section 143 of this subpart. In the case of a first-to-default credit derivative, there are no underlying exposures that are subordinated to the Board-regulated institution's position. In the case of a second-or-subsequent-to-default credit derivative, the smallest (n-1) notional amounts of the underlying exposure(s) are subordinated to the Board-regulated institution's position.
(ii) The detachment point (parameter D) equals the sum of parameter A plus the ratio of the notional amount of the Board-regulated institution's position in the n th-to-default credit derivative to the total notional amount of all underlying exposures. For purposes of the SSFA, parameter A is expressed as a decimal value between zero and one. For purposes of using the SFA in paragraph (b)(2)(vii)(B) of this section to calculate the specific risk add-on for its position in an n th-to-default credit derivative, parameter D must be set to equal the L input plus the thickness of tranche T input to the SFA formula in § 217.143 of this subpart.
(2) A Board-regulated institution that does not use the SFA in paragraph (b)(2)(vii)(B) of this section to determine a specific risk-add on, or the SSFA in paragraph (b)(2)(vii)(C) of this section to determine a specific risk-weighting factor for its position in an n th-to-default credit derivative must assign a specific risk-weighting factor of 100 percent to the position.
Notes, amendments, and revision history
Amendments
[Reg. Q, 78 FR 62157, 62285, Oct. 11, 2013, as amended at 79 FR 78295, Dec. 30, 2014; 84 FR 35269, July 22, 2019; 85 FR 4419, Jan. 24, 2020]
Authority
Authority: 12 U.S.C. 248(a), 321-338a, 481-486, 1462a, 1467a, 1818, 1828, 1831n, 1831o, 1831p-1, 1831w, 1835, 1844(b), 1851, 3904, 3906-3909, 4808, 5365, 5368, 5371, 5371 note, and sec. 4012, Pub. L. 116-136, 134 Stat. 281.
Source
Source: Reg. Q, 78 FR 62157, 62285, Oct. 11, 2013, unless otherwise noted.
Amendments
[Reg. Q, 78 FR 62157, 62285, Oct. 11, 2013, as amended at 79 FR 78295, Dec. 30, 2014; 84 FR 35269, July 22, 2019; 85 FR 4419, Jan. 24, 2020]