Booster Seat Safety Act
A BILL
To direct the Secretary of Transportation to revise regulations relating to child restraint systems, and for other purposes.
Sec. 2 Child restraint systems
“(o) The packaging for each booster seat shall be permanently labeled with the information specified in S5.5.2(g).
“(p) On each booster seat, and on the packaging of such booster seat, there shall be placed—
“(1) a permanent label stating: “For use by children [_] years old or older and who are over [_] pounds.”, with respect to which—
“(A) the first bracket is replaced with the minimum age recommended for a user, which may not be an age younger than 4 years old; and
“(B) the second bracket is replaced with the minimum weight recommended for a user, which may not be under 40 pounds; and
“(2) a permanent label stating: “Strongly recommended children use this seat only when they reach either the height or weight limit for a child restraint system with internal harness as indicated by the manufacturer.”.
“(q) On each child restraint system with internal harness, and on the packaging of such child restraint system with internal harness, there shall be placed a permanent label stating: “To prevent possible injury or death, it is important to delay the transition from a child restraint system with internal harness to a booster seat as long as possible, until the child reaches the weight or height limit of the child restraint system with internal harness as indicated by the manufacturer.”.
“(r) On each combination car seat, there shall be placed a permanent label stating: “Please use this seat with the internal harness as long as possible, until your child outgrows the maximum weight of [_] or reaches the maximum height of [_]. Once they have exceeded such weight or height, this seat can be used as a belt positioning booster seat with the vehicle seat belt.”, with respect to which—
“(1) the first bracket is replaced with the maximum weight recommended for an internal harness user, which may not be under 40 pounds; and
“(2) the second bracket is replaced with the maximum height recommended for an internal harness user.”