§2051. Congressional findings and declaration of purpose — Inbound Citations
15 U.S.C. § 2051
Cited by 8 provisions in release 119-102.
Citations to 15 U.S.C. § 2051 as a whole
-
(c) To the extent that any regulation promulgated by the Commission under this section (or any section of the Consumer Product Safety Act [15 U.S.C. 2051 et seq.] or any other Act enforced by the Commission, as such Acts are affected by this section) is inconsistent with the ASTM F963 standard, such promulgated regulation shall supersede the ASTM F963 standard to the extent of the inconsistency.
-
(1) For purposes of this section, the term “Act” means the Consumer Product Safety Act [15 U.S.C. 2051 et seq.], the Flammable Fabrics Act [15 U.S.C. 1191 et seq.], the Poison Prevention Packaging Act [15 U.S.C. 1471 et seq.], and the Federal Hazardous Substances Act [15 U.S.C. 1261 et seq.].
-
(f) Subsections (a) and (b)(1) and any rule promulgated under subsection (b)(3) shall be considered consumer product safety standards under the Consumer Product Safety Act [15 U.S.C. 2051 et seq.]. Nothing in this section or the Consumer Product Safety Act (15 U.S.C. 2051 et seq.) shall be construed to preempt or otherwise affect any State requirement with respect to any phthalate alternative not specifically regulated in a consumer product safety standard under the Consumer Product Safety Act.
-
(1) complaints received by the Inspector General from employees of the Commission about failures of other employees to enforce the rules or regulations of the Consumer Product Safety Act [15 U.S.C. 2051 et seq.] or any other Act enforced by the Commission or otherwise carry out their responsibilities under such Acts if such alleged failures raise issues of conflicts of interest, ethical violations, or the absence of good faith; and
-
Upon request, the Administrator shall assist the Consumer Product Safety Commission in the development of fire safety standards or codes for consumer products, as defined in the Consumer Product Safety Act (15 U.S.C. 2051 et seq.).
-
(1) Until the final standard takes effect, a bicycle helmet that does not conform to an interim standard as required under subsection (a)(1) shall be considered in violation of a consumer product safety standard promulgated under the Consumer Product Safety Act [15 U.S.C. 2051 et seq.].
-
(a) The requirements described in subsection (b) shall be treated as a consumer product safety rule issued by the Consumer Product Safety Commission under the Consumer Product Safety Act (15 U.S.C. 2051 et seq.).
-
For purposes of the Consumer Product Safety Act [15 U.S.C. 2051 et seq.], all drinking water coolers identified by the Administrator on the list under section 300j–23 of this title as having a lead-lined tank shall be considered to be imminently hazardous consumer products within the meaning of section 12 of such Act (15 U.S.C. 2061). After notice and opportunity for comment, including a public hearing, the Consumer Product Safety Commission shall issue an order requiring the manufacturers and importers of such coolers to repair, replace, or recall and provide a refund for such coolers within 1 year after October 31, 1988. For purposes of enforcement, such order shall be treated as an order under section 15(d) of that Act (15 U.S.C. 2064(d)).