---
kind: "section"
citation: "47 C.F.R. § 95.765"
title: "47"
number: "95.765"
heading: "RCRS frequency accuracy."
url: "https://uscodex.org/cfr/47/95.765"
---

# §95.765. RCRS frequency accuracy.


Each RCRS transmitter type must be designed to satisfy the frequency accuracy requirements in this section.

- (a) Each RCRS transmitter type capable of transmitting on channels in the 72 or 75 MHz frequency band must be designed such that the carrier frequencies remain within ±20 parts-per-million (ppm) of the channel center frequencies listed in § [95.763(b)](/cfr/47/95.763.md?p=b) and [(c)](/cfr/47/95.763.md?p=c) during normal operating conditions.
- (b) Except as allowed under [paragraph (c)](#c) of this section, each RCRS transmitter type capable of transmitting in the 26-28 MHz frequency band must be designed such that the carrier frequencies remain within ±50 ppm of the channel center frequencies listed in [§ 95.763(a)](/cfr/47/95.763.md?p=a) during normal operating conditions.
- (c) Each RCRS transmitter type that transmits in the 26-28 MHz frequency band with a mean transmitter power of 2.5 W or less and is used solely by the operator to turn on and/or off a device at a remote location, other than a device used solely to attract attention, must be designed such that the carrier frequencies remain within ±100 ppm of the channel center frequencies listed in [§ 95.763(a)](/cfr/47/95.763.md?p=a) during normal operating conditions.

## Notes

### Authority

Authority: 47 U.S.C. 154, 303, 307.

### Source

Source: 82 FR 41104, Aug. 29, 2017, unless otherwise noted.