---
kind: "section"
citation: "46 C.F.R. § 164.009-7"
title: "46"
number: "164.009-7"
heading: "Contents of application."
url: "https://uscodex.org/cfr/46/164.009-7"
---

# §164.009-7. Contents of application.


An application for approval of a material under this subpart must contain the following:

- (a) **The trade name of the material.**
- (b) The thickness or density, or both, of the material, or the range of thicknesses or densities, or both, of the material as manufactured.
- (c) **The composition of the material.**
- (d) **The density and percentage of moisture and volatile matter of each component of the material.**
- (e) **The address of the factory manufacturing the material.**
- (f) A sample representative of the material that is 305 mm long and 305 mm wide and that has a height equal to the largest thickness of the material as manufactured.
- (g) If the applicant intends to observe the test and measurements of the sample, a statement to that effect.
- (h) A commitment by the applicant to pay for the cost of the test and measurements when billed by the designated laboratory.

## Notes

### Source

Source: CGD 74-129, 41 FR 41701, Sept. 23, 1976, unless otherwise noted.

### Authority

Authority: 46 U.S.C. 3306, 3703, 4302; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; DHS Delegation 00170.1, Revision No. 01.4.