--- kind: "section" citation: "40 C.F.R. § 82.27" title: "40" number: "82.27" heading: "Incorporation by reference." url: "https://uscodex.org/cfr/40/82.27" --- # §82.27. Incorporation by reference. - (a) - (1) Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register under 5 U.S.C. [552(a)](/usc/5/552.md?p=a) and [1](/usc/5/1.md) CFR [part 51](/cfr/40/part51.md). All approved incorporation by reference (IBR) material is available for inspection at EPA and at the National Archives and Records Administration (NARA). Contact EPA at: U.S. EPA's Air and Radiation Docket; EPA West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20460, 202-566-1742. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov. - (2) The IBR material may be obtained from the sources in the following paragraphs of this section or from one or more private resellers listed in this [paragraph (a)(2)](#a-2). For material that is no longer commercially available, contact: U.S. EPA's Air and Radiation Docket; EPA West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20460; a-and-rdocket@epa.gov. - (i) **Accuris Standards Store, 321 Inverness Drive, South Englewood, CO 80112; phone—** - (800) 332-6077; website: https://accuristech.com. - (ii) American National Standards Institute (ANSI), 25 West 43rd Street, Fourth Floor, New York, NY 10036-7417; phone: (212) 642-4980; email: info@ansi.org; website: www.ansi.org. - (iii) **GlobalSpec, 257 Fuller Road, Suite NFE 1100, Albany, NY 12203-3621; phone—** - (800) 261-2052; website: https://standards.globalspec.com. - (iv) **Nimonik Document Center, 401 Roland Way, Suite 224, Oakland, CA 94624; phone (650) 591-7600; email—** info@document-center.com; website: www.document-center.com. - (b) **American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016, phone—** 800.843.2763, email: CustomerCare@asme.org; website: www.asme.org. - (1) ASME MFC-3M-2004, Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi, issued August 15, 2005; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (2) ASME MFC-4M-1986 (Reaffirmed 2016), Measurement of Gas Flow by Turbine Meters, reaffirmed 2016, IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (3) ASME MFC-5M-1985 (Reaffirmed 1994), Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, copyright 1985; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (4) ASME MFC-6M-1998, Measurement of Fluid Flow in Pipes Using Vortex Flowmeters, July 4, 1998; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (5) ASME MFC-7M-1987 (Reaffirmed 1992), Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles, copyright 1987; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (6) ASME MFC-9M-1988 (Reaffirmed 2001), Measurement of Liquid Flow in Closed Conduits by Weighing Method, reaffirmed 2001; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (7) ASME MFC-11M-2006, Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters, issued March 30, 2007; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (8) ASME MFC-14M-2003, Measurement of Fluid Flow Using Small Bore Precision Orifice Meters, issued April 17, 2003; IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (c) ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428; phone: 610.832.9500; email: service@astm.org; website: www.astm.org/. - (1) ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy, approved October 1, 2003, IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (2) [Reserved] - (d) U.S. Environmental Protection Agency, 1200 Pennsylvania Avenue NW, Washington, DC 20460; phone: 202.272.0167; website: www.epa.gov. - (1) **Approved Alternative Method 012—** An Alternate Procedure for Stack Gas Volumetric Flow Rate Determination (Tracer Gas) (ALT-012), U.S. Environmental Protection Agency Emission Measurement Center, May 23, 1994, IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). - (2) **Emissions Inventory Improvement Program, Volume II—** Chapter 16, Methods for Estimating Air Emissions from Chemical Manufacturing Facilities, August 2007, Final, IBR approved for [§ 82.25(c)](/cfr/40/82.25.md?p=c). - (3) Protocol for Equipment Leak Emission Estimates, EPA-453/R-95-017, November 1995 (EPA-453/R-95-017), IBR approved for § [82.25(c)](/cfr/40/82.25.md?p=c) and [(d)](/cfr/40/82.25.md?p=d). - (4) Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1, EPA-430-R-10-003, March 2010 (EPA 430-R-10-003), IBR approved for [§ 82.25 (d)](/cfr/40/82.25.md?p=d). - (5) Tracer Gas Protocol for the Determination of Volumetric Flow Rate Through the Ring Pipe of the Xact Multi-Metals Monitoring System, also known as Other Test Method 24 (Tracer Gas Protocol), Eli Lilly and Company Tippecanoe Laboratories, September 2006, IBR approved for [§ 82.25(d)](/cfr/40/82.25.md?p=d). ## Notes ### Amendments [89 FR 82450, Oct. 10, 2024] ### Source Source: 60 FR 24986, May 10, 1995, unless otherwise noted. ### Authority Authority: 42 U.S.C. 7414, 7601, 7671-7671q. ### Source Source: 57 FR 33787, July 30, 1992, unless otherwise noted. ### Amendments [89 FR 82450, Oct. 10, 2024]