---
kind: "section"
citation: "40 C.F.R. § 63.5714"
title: "40"
number: "63.5714"
heading: "How do I demonstrate compliance if I use filled resins?"
url: "https://uscodex.org/cfr/40/63.5714"
---

# §63.5714. How do I demonstrate compliance if I use filled resins?

- (a) If you are using a filled production resin or filled tooling resin, you must demonstrate compliance for the filled material on an as-applied basis using equation 1 of this section.
- (b) If the filled resin is used as a production resin and the value of PVF calculated by equation 1 of this section does not exceed 46 kilograms of organic HAP per megagram of filled resin applied, then the filled resin is in compliance.
- (c) If the filled resin is used as a tooling resin and the value of PVF calculated by equation 1 of this section does not exceed 54 kilograms of organic HAP per megagram of filled resin applied, then the filled resin is in compliance.
- (d) If you are including a filled resin in the emissions averaging procedure described in [§ 63.5710](/cfr/40/63.5710.md), then use the value of PVF calculated using equation 1 of this section for the value of PV i in equation 2 of [§ 63.5710](/cfr/40/63.5710.md).

## Notes

### Source

Source: 66 FR 44232, Aug. 22, 2001, unless otherwise noted.

### Authority

Authority: 42 U.S.C. 7401 et seq.

### Source

Source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted.