---
kind: "section"
citation: "40 C.F.R. § 63.3092"
title: "40"
number: "63.3092"
heading: "How must I control emissions from my electrodeposition primer system if I want to comply with the combined primer-surfacer, topcoat, final repair, glass bonding primer, and glass bonding adhesive emission limit?"
url: "https://uscodex.org/cfr/40/63.3092"
---

# §63.3092. How must I control emissions from my electrodeposition primer system if I want to comply with the combined primer-surfacer, topcoat, final repair, glass bonding primer, and glass bonding adhesive emission limit?


If your electrodeposition primer system meets the requirements of either paragraph [(a)](#a) or [(b)](#b) of this section, you may choose to comply with the emission limits of [§ 63.3090(b)](/cfr/40/63.3090.md?p=b) or [§ 63.3091(b)](/cfr/40/63.3091.md?p=b) instead of the emission limits of [§ 63.3090(a)](/cfr/40/63.3090.md?p=a) or [§ 63.3091(a)](/cfr/40/63.3091.md?p=a).

- (a) **Each individual material added to the electrodeposition primer system contains no more than—**
  - (1) 1.0 percent by weight of any organic HAP; and
- (b) Emissions from all bake ovens used to cure electrodeposition primers must be captured and ducted to a control device having a destruction or removal efficiency of at least 95 percent.

## Notes

### Amendments

[69 FR 22623, Apr. 26, 2004, as amended at 85 FR 41124, July 8, 2020]

### Source

Source: 69 FR 22623, Apr. 26, 2004, unless otherwise noted.

### Authority

Authority: 42 U.S.C. 7401 et seq.

### Source

Source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted.

### Amendments

[69 FR 22623, Apr. 26, 2004, as amended at 85 FR 41124, July 8, 2020]