---
kind: "section"
citation: "40 C.F.R. § 204.57-5"
title: "40"
number: "204.57-5"
heading: "Reporting of test results."
url: "https://uscodex.org/cfr/40/204.57-5"
---

# §204.57-5. Reporting of test results.

- (a)
  - (1) The manufacturer shall submit a copy of the test report for all testing conducted pursuant to [§ 204.57](/cfr/40/204.57.md) at the conclusion of each twenty-four hour period during which testing is done.
  - (2) For each test conducted the manufacturer will provide the following information:
    - (i) **Configuration and category identification, where applicable.**
    - (ii) **Year, make, assembly date, and model of compressor.**
    - (iii) **Compressor serial number.**
    - (iv) Test results by serial numbers
  - (3) The first test report for each batch sample will contain a listing of all serial numbers in that batch.
- (b) In the case where an EPA Enforcement Officer is present during testing required by this subpart, the written reports requested in [paragraph (a)](#a) of this section may be given directly to the Enforcement Officer.
- (c) Within five days after completion of testing of all compressors in a batch sample, the manufacturer shall submit to the Administrator a final report which will include the information required by the test request in the format as stipulated, in addition to the following:
  - (1) The name, location, and description of the manufacturer's noise test facilities which meet the specifications of [§ 204.54](/cfr/40/204.54.md) and were utilized to conduct testing reported pursuant to this section; except, that a test facility that has been described in a previous submission under this subpart need not be described again but must be identified as such.
  - (2) A description of the random compressor selection method used, referencing any tables of random numbers that were used, and the name of the person in charge of the random number selection.
  - (3) **The following information for each test conducted—**
    - (i) The completed data sheet required by [§ 204.54](/cfr/40/204.54.md) for all noise emission tests including, for each invalid test, the reason for invalidation.
    - (ii) A complete description of any modification, repair, preparation, maintenance, and/or testing which was performed on the test compressor and will not be performed on all other production compressors.
    - (iii) The reason for the replacement, where a replacement compressor was authorized by the Administrator, and, if any, the test results for replaced compressors.
  - (4) **The following statement and endorsement—**
- (d) All information required to be forwarded to the Administrator pursuant to this section shall be addressed to Director, Noise Enforcement Division (EN-387), U.S. Environmental Protection Agency, Washington, DC 20460.

## Notes

### Amendments

[41 FR 2172, Jan. 14, 1976, as amended at 42 FR 41635, Aug. 18, 1977; 43 FR 38705, Aug. 30, 1978]

### Authority

Authority: (42 U.S.C. 4905), 86 Stat. 1237.

### Source

Source: 41 FR 2172, Jan. 14, 1976, unless otherwise noted.

### Amendments

[41 FR 2172, Jan. 14, 1976, as amended at 42 FR 41635, Aug. 18, 1977; 43 FR 38705, Aug. 30, 1978]