---
kind: "section"
citation: "19 C.F.R. § 115.63"
title: "19"
number: "115.63"
heading: "Application for approval."
url: "https://uscodex.org/cfr/19/115.63"
---

# §115.63. Application for approval.


Each application by a manufacturer for certification of a road vehicle by design type must include:

- (a) Three copies, each no larger than 3 feet by 4 feet, of the Customs and TIR plan;
- (b) Customs and TIR plan number;
- (c) **Three copies of the specifications which include the following information—**
  - (1) The name and address of the manufacturer and the owner; and
  - (2) **A description of the road vehicle including the—**
    - (i) Particulars of construction;
    - (ii) Dimensions;
    - (iii) Construction materials; and
    - (iv) **Marks and numbers, including chassis, engine, and registration numbers.**
- (d) **A statement signed by the manufacturer that—**
  - (1) It will present vehicles of the type concerned to the Certifying Authority which that Authority may wish to examine;
  - (2) Permit the Certifying Authority to examine further units at any time during or after the production run;
  - (3) Notify the Certifying Authority of each change in the design or specifications before adoption;
  - (4) Mark the road vehicles in a visible place with the identification number or letters of the design type and the serial number of the vehicle in the type series manufacturer's number; and
  - (5) **Keep a record of vehicles manufactured according to the design type.**

## Notes

### Authority

Authority: 5 U.S.C. 301, 19 U.S.C. 66, 1624; E.O. 12445 of October 17, 1983.

### Source

Source: T.D. 86-92, 51 FR 16161, May 1, 1986, unless otherwise noted.